Steel :

• ISI standard FE-500/550TMT Steel will be used as per structural requirement.

• Sunvik ,Kamadhenu,Meenaxi, Maharshi or equivalent brands will be used.

• Steel Rods starting from 6mm upto 20mm will be used according to the structural design and requirement. Basic Rate Rs.60,000/- per MT.

Cement :

• ISI Standard 53 and 43 Grade cement will be used.

• 53-Grade will be used for Masonry and 43-Grade will be used for Plastering.

• Dalmiya,Zuari, Bharthi or equivalent Brands will be used.

Sand :

M-Sand will used for Masonry and P-Sand will be used for Plastering.

Blocks/Bricks :

• Standard Solid 6-inch and 4-inch concrete blocks will be used.

• 6-inch blocks for External walls and 4-inch blocks for internal walls.

Note : Clay-wire cut bricks can be used with Extra cost of Rs.120/sqft.

Concrete : RCC Design mix will be used as per structural requirement.

Waterproofing : Fosroc or Dr.Fixit Water proofing solution will be used.